153 UCW Clamp-on Sensors

It is designed for applications where a customer is unwilling or unable to cut into the process measurement line to install an in-line meter. Flow measurement up to 6000 mm can be done on metal and plastic pipes lined or unlined and with composite pipes having clean liquids.
  • Small, Medium and Large Sensors to cover line sizes from 15 to 6000 mm.
  • Installation without Process Interruption.
  • Suitable for a wide range of pipe materials including lined pipes.
  • Suitable for both conductive and non-conductive liquids.
  • Accurate and Cost-Effective Measurement.
  • Modular design offers better flexibility and ease of operation with high degrees of efficiency.
  • Optional Heat Flow and Pressure Measurement.
Power Supply Std. - 85 - 230 VAC; Optional - 24 VDC
Measured Values Volumetric Flow, Flow Velocity, Flow Direction, Speed of Sound, Quality of measured signal
Flow Velocity 0 - 32 m/s bi-directional
Accuracy ± 1%* for dia >= 50mm and v>0.5m/s
Repeatability 0.30%
Sensors Clamp-on: Small, Medium and Large Sensors to cover line sizes from 15 to 6000 mm.
Sensors – Temperature Range 0 to 70°C, For high temperature up to 160 C, contact HO
Display 2 Line backlight LCD
Keyboard 4 X 4 Numeric Keyboard membrane
Pipe Materials Mild Steel/ Carbon Steel, Stainless Steel, Cast Iron, Ductile Iron, PVC, Plastic*
Lining Mortar, Tar Epoxy, Rubber
Outputs 4-20 mA/ 0-20 mA; Relay output; Open Collector Frequency/ Pulse output
Communication RS 485/ RS 232 with MODBUS (ASCII or RTU)
Inputs Up to 3 Analog input channels and Up to 2 channel 3 Wire compensated Pt 100
Data Logging Built-in or optional PC based
Protection IP 68  (Applicable for Converter & Clamp on Sensors both)
  • Potable Water
  • Deionized / deminerilized water
  • Cooling and heating water
  • Broad range of hydrocarbons
  • Purified Water
  • Waste Water
  • Sewage
  • Discharge Water